Approx. Rs 270 / KilogramGet Latest Price
|Grade Standard||Technical Grade|
ACURO™ RO Antiscalant Balls
prevent scale and stops corrosion. It utilizes the phenomenon that minute concentrations of polyphosphates are sufficient to inhibit the deposition of scale onto metallic surfaces. Because of their phosphate and silicate content, ACURO antiscalant balls also inhibits corrosion by forming a thin protective layer on the metal surface. A concentration of 2-3 ppm is sufficient to achieve both of these effects. AcuRO™ Antiscalant BALLS will also slowly remove existing scale in old pipes if it consists of brown scale, i.e. ironoxide. Hard scale, i.e. calcium carbonate cannot so easily be removed by ACURO Antiscalant BALLS. Here the advantage is again that ACURO Antiscalant BALLS will prevent further scaling up. Experience shows that scale and corrosion is not only found in galvanized but also in copper pipes. Even in plastic pipes one can find scale and deposits. As a rule of thumb one can say that 1 mm scale on the heating coils of a boiler, increases the energy cost by 15%. ACURO antiscalant balls consists of 100% active substance. The use in tap water and other types of fresh water at the prescribed dosage is inoffensive. AcuRO™ antiscalant balls dispensers can be installed in almost every water system. They require no electric installation and hardly any maintenance. They only have to be refilled with spheres every 3 - 6 months. Refilling is very easy. AcuRO™ antiscalant balls protect membrane of domestic RO systems and ensures long life of membranes.
- Protect water systems in hotels, public buildings, private households and industry against scale formation and corrosion.
- Prevent so-called ‘brown’ or ‘red’ water and clogged pipes.
- Save expensive repairs or even replacement of water pipes, boilers, heaters, cooling systems etc.
- Help to save energy
- Extend the life of your water installation.
|Purity (as P2O5)||71.0% min|
|Water Insoluble||0.06 % max|
|Heavy Metals (as Pb)||8 ppm max|
|Arsenic (As)||3 ppm max|
|pH Value||3.5 – 4.0|
|Fluoride||35 ppm max|
|Iron Content||40 ppm max|
|Average Weight||10 +/- 0.5 gm / ball|
|Average Dissolution||0.03 – 0.05 g/ 24 hours|