Acid Inhibitor

Approx. Rs 330 / KilogramGet Latest Price

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• Rodine 102 is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 270 / KilogramGet Latest Price

• Can be used for formulating pre-inhibited cleaners or descalant
• Compatible with fluorides and additives
• High shelf life and inhibitor efficiency
• Fume suppressant
• Multi-metal protection including copper and brass alloys

• For Hydrochloric acid (30-33%) - 1% w/w for use up to 120oC (250oF) For HCL + HF mixture - 2% w/w for use up to 120oC (250oF).
• For onsite cleaning operations, RODINE 213 SPL should be dosed in the following ratio for every 1000ltrs of diluted acid at .5% and 10% w/w HCL concentration:- Up to 65oC - 1ltr (1.1kg) for 5% and 1.25ltr (1.35kg) for 10% Up to 80oC - 2ltr (2.2kg) for 5% and 2.5ltr (2.7kg) for 10% Up to 93oC - 3ltr (3.2kg) for 5% and 3.5ltr (3.8kg) for 10%.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• RODINE 213 SPL is available in 35 kgs , 50 kgs and 220 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 175 / KilogramGet Latest Price

• Modifies metal surface to prevent corrosion
• Easy to use
• Excellent wetting properties for better cleaning
• Effective fume suppression
• Saves Zinc in galvanizing (Plating)
• Reduces metal loss
• Enriches strength of pickling acid bath, and reduces acid consumption

• RODINE 103 is a concentrated product and is used at various dosage rates depending upon the operating temperature.
• For every 1000ltrs of diluted hydrochloric acid at 5-10% w/w dosage of RODINE 103 is as follows:
• At ambient temperature - 1 ltr (1.1kgs)
• Up to 80oC - 2 ltrs (2.2kgs)
• From 80-105oC - 3 ltrs (3.3kgs)

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• RODINE 103 should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer label and MSDS for details. Shelf life two years if stored properly.
• Rodine 103 is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 330 / KilogramGet Latest Price

• Modifies metal surface to prevent corrosion
• Single product for multiple acids
• Imparts excellent pickling
• Chloride free
• Easily soluble with all acid concentrations

• For each 1000ltrs of pickling bath RODINE 31A must be added at the rate of 1 to 5ltrs (1.1 - 5.7kgs).The dosage varies with the bath temperature as follows:-

• Up to 65 C - 1ltr (1.1kg)
• 65°C - 80°C - 3ltrs (3.4kg)
• 80°C - 90°C - 4ltrs (4.6kg)
• 90 - 100°C - 5ltrs (5.7kg)

• In Hydrochloric acid - max.60°C
• In Sulfuric, sulfamic and phosphoric acid- max.80°C In other acids - max.100°C.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• RODINE 31A is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 385 / KilogramGet Latest Price

• Modifies metal surface to prevent corrosion
• Easy to use
• Excellent wetting properties for better cleaning
• NPE free, low-toxicity
• Reduces metal loss
• Enriches strength of pickling acid bath, and reduces acid consumption
• Cost effective

• RODINE 213 SF is a concentrated product and is used at various dosage rates depending upon the operating temperature.
• In acid pickling application: For every 1000ltrs of diluted hydrochloric acid at 5-20% w/w add 1 to 6kgs of RODINE 213 SF depending upon the temperature and concentration of acid.
• In acid cleaning application: Add 1-2kgs of RODINE 213 SF for every 100kgs of concentrated industrial grade HCL (33-37%), depending upon the operational temperature.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• RODINE 213 SF is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 368 / KilogramGet Latest Price

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• Rodine 214 is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 310 / KilogramGet Latest Price

• RODINE 52 is an acidic blend of alkoxylated fatty polyamines, propargyl alcohol, Butanol, formaldehyde and defoamer.
• RODINE 52 is a non- foaming acidic inhibitor for use in acid pickling, cleaning and oil well acidization.
• RODINE 52 is designed to prevent the acidic attack of Hydrochloric acid (of all concentration) on various metals such as Copper, Brass, Nickel, Tin, Lead, Zinc, Galvanized surface and all type of steel.

• Non foaming version 
• Multi-use acid inhibitor
• Excellent wetting properties for better cleaning
• High inhibitor efficiency of above 99%

• RODINE 52 should be dozed at 0.1-0.3% v/v of diluted acid depending upon the operating temperature requirement.
• RODINE 52 is effective up to temperature of 93oC or 200oF.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• RODINE 52 is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 290 / KilogramGet Latest Price

• RODINE 85 is a blend of 1, 3 Diethyl Thiourea, Propargyl alcohol, Formaldehyde, Substituted triazine & O-Toluidine and detergent.
• RODINE 85 is designed to prevent the acidic attack of sulfuric acid (of all concentration) on various metals such as Copper, Brass, Nickel and all type of steel.
• RODINE 85 is a non- foaming acid corrosion inhibitor.

• Strong inhibitor with detergent improves rinsability
• Aids in attaining maximum cleanliness on nickeled work
• Low foaming inhibitor for general purpose inhibition

• RODINE 85 should be dozed at 0.125-0.5 % v/v of concentrated acid depending upon the operating temperature requirement.
• RODINE 85 is effective up to temperature of 90oC or 195oF.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• RODINE 85 is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 375 / KilogramGet Latest Price

Approx. Rs 365 / KilogramGet Latest Price

• Modifies metal surface to prevent corrosion
• Excellent wetting properties for better cleaning
• Easy to calculate and dose

• For pickling of non-reactive steel - 0.25% v/v
• For Alloy and more reactive steel - 0.5% v/v

• To replenish the inhibitor level RODINE 57 must be added when new acid is added to the bath.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• RODINE 57is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 350 / KilogramGet Latest Price

• RODINE 130 is a multi acid corrosion inhibitor based on diethyl thiourea, stabilizers and surfactants.
• RODINE 130 is semi foaming acid corrosion inhibitor that is suitable for pre-formulated descalant.
• RODINE 130 is suitable for metal such as Copper, Brass, Nickel, Tin, Lead, Zinc, Galvanized surface and all type of steel.

• Modifies metal surface to prevent corrosion
• Easy to use
• Excellent wetting properties for better cleaning
• Cost Effective

• RODINE 130 is used at a concentration of 3 to 4% w/w of dry acid depending on temperature requirement.
• RODINE 130 can be used effectively up to temperature of 95oC.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• RODINE 130 is available in 30 kgs, 50 kgs in HDPE drums.

• HS Code: 38249022

Approx. Rs 130 / KilogramGet Latest Price

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• HEDP ACID INHIBITORis available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums. 

• HS Code: 38249022

Approx. Rs 330 / KilogramGet Latest Price

• Low toxicity
• Over 98.5% inhibition in cleaning solutions
• Excellent scale removal
• Use on mild and stainless steels, as well as Monel
• Effective inhibitor for most organic acids
• Economical
• Alkypyridine-free to prevent insolubility issues

• RODINE 2010 should be dozed at 0.1-0.2% v/v of diluted acid depending upon the operating temperature requirement.
• RODINE 2010 is effective up to temperature of 176oC or 350oF.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• RODINE 2010 is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 170 / KilogramGet Latest Price

• RODINE 103 NPF is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 270 / KilogramGet Latest Price

• Long or short term storage of metals and alloys
• Shipping domestically and abroad
• Safe handling between production processes
• Protection from environmental variables such as temperature and humidity

• These chemical additives are applied by dip, spray or other coating methods to protect metal components and equipment from the corrosive action of a direct contact or environmental acid. The concentration and type acid inhibitor needed is determined by the type of metal to be protected and the conditions experienced by the metal.
• Aluminum, steel, iron, titanium, etc., will all require alloy-specific formulations of corrosion preventative coatings for the best end result. Maintaining a proper blend ratio and homogeneous solution during the treatment is also essential to ensure the most effective and long-lasting protection.

• HS Code: 38249022

Approx. Rs 165 / KilogramGet Latest Price

• Low toxicity
• Over 98.5% inhibition in cleaning solutions
• Excellent scale removal
• Use on mild and stainless steels, as well as Monel
• Effective inhibitor for most organic acids
• Economical
• Alkypyridine-free to prevent insolubility issues

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• EDTA ACID INHIBITOR is available in 35 kgs, 50 kgs and 210 kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 370 / KilogramGet Latest Price

• Modifies metal surface to prevent corrosion
• Single product for multiple acids
• Imparts excellent pickling
• Chloride free
• Easily soluble with all acid concentrations

• For each 1000ltrs of pickling bath RODINE 31A must be added at the rate of 1 to 5ltrs (1.1 - 5.7kgs).

• Up to 65 C - 1ltr (1.1kg)
• 65°C - 80°C - 3ltrs (3.4kg)
• 80°C - 90°C - 4ltrs (4.6kg)
• 90 - 100°C - 5ltrs (5.7kg)

• For replenishment of bath with concentrated pickling acid, RODINE 31A should be dosed at the rate of 0.6 to 2.3kgs (0.5 to 2.0ltrs) per 100kgs of concentrated pickling acid.

• In Hydrochloric acid - max.60°C
• In Sulfuric, sulfamic and phosphoric acid- max.80°C In other acids - max.100°C.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• RODINE 31A is available in 35kgs, 50kgs and 210kgs in HDPE jars and drums.

• HS Code: 38249022

Approx. Rs 200 / KilogramGet Latest Price

• HS Code: 38249022

Additional Information:

• Item Code: Acurocor-BR83

Approx. Rs 145 / KilogramGet Latest Price

Closed Loop or Closed Circuit Cooling or Heating Systems that use water for heat transfer must meet the following three mandatory requirements:

• Using Soft or DM water for feed and make up
• An appropriate Corrosion Inhibitor with yellow metal protection, oxygen scavenger, added with antiscalant.
• A suitable chlorine free Biocide for preserving water.

Description:

• Chemical treatment removes dissolved oxygen that cause oxidation of metal to metal oxide i.e, Iron + Oxygen = Iron Oxide (Rust) .The chemical also contains a specific inhibitor to protect copper from corrosion and removes / prevents any sort of scale formation in the system.AcuroCor NC 5 Closed loop Corrosion Inhibitor surpasses the performance of other such closed loop treatment chemicals available in the market.

Applications:

• Engine Jacket
• Chiller Water Circuit
• Glycol Brine System
• Hot Water Circuit
• Engine Coolant
• Process chilling and heating, etc

Other Details:

• HS Code: 38249022

Additional Information:

• Item Code: ACUROCOR-NC5

Approx. Rs 370 / KilogramGet Latest Price

• ACUROCOR H15 is a specially formulated inhibitor to be added to hydrochloric acid while pickling steel surfaces.
• ACUROCOR H15 by its inhibiting effect substantially retard the metal attack by the acid.
• ACUROCOR H15 helps in suppressing considerably the evolution of acid fumes.
• ACUROCOR H15 also helps in the removal of residual oils and other superficial impurities on the metal surface. By eliminating the oil barrier from the surface ACUROCOR H15 makes the acid medium more effective and economical.

• HS Code: 38249022

Additional Information:

• Item Code: ACUROCOR-H15

Approx. Rs 100 / KilogramGet Latest Price

• HS Code: 38249022

Approx. Rs 90 / KilogramGet Latest Price

• Excellent cleaner and brightener
• Removes of oil and grease
• Non-acidic
• Quick action
• Good dispersion for quick rinsing
• Fortified with corrosion inhibitor
• Concentrated product
• Self foaming
• Economical
• Leaves coils just as new

• Non-Acidic Coil Cleaner is a concentrated product and should be used as diluted with water in the ratio of 1part product with 3-5 parts water (depending upon the severity of the soil). It shows excellent cleaning efficacy and foam generation in all methods of application such as: Spraying, Sprinkling, Pouring and Dip method. The product should ideally be allowed a contact time of 10mins for cleaning by self foaming. No scrubbing or wiping is required. Rinse well with plenty of water till foam is completely removed.

• Aluminum is a very soft metal and is highly prone to corrosion. Care must be taken in terms of good and complete rinsing of the foam from the fins.

• Non-Acidic Coil Cleaner is fortified with corrosion inhibitor that protects aluminum during cleaning. However, it does not impart any protective layer or coating on aluminum.

• Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

• This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

• Non-Acidic Coil Cleaner is available in 25 kgs and 50 kgs HDPE jars and drums.

• HS Code: 38249022