Send Email
Send SMS
Search
Acuro Organics Limited, New Delhi
Acuro Organics Limited, New Delhi


Molecular Sieves

Appearing as small opaque pinkish beads,molecular sieves are highly porous crystalline metal-alumino silicates. Compared with other desiccants, the distinctive feature is the uniformity pore size in the crystal-lattice structure which is part of the manufacturing process. As the pore size on molecular sieve particles is controlled, it allows the end product to be more precise then other desiccants so different pore sizes can be found, each one with a few different properties. Absorption will occur only for molecules with smaller diameters than the molecular sieves’ pore size larger molecules being excluded from absorption. Preferentially absorbed are molecules of greater polarity which makes molecular sieve ideal for absorption of water from liquids and gases as water molecules are both polar and very small. Molecular sieve is classified by its pore size in angstroms, some of the most used being 3A, 4A, 5A, 8A (10X) and 10A, also known as 13X. This feature allows the selection of a molecular sieve which can absorb water yet exclude most of other molecules or other desiccants which will absorb bigger molecules like aromatics or carbon dioxides. Molecular sieve absorbs up to 22% of its own weight and can hold moisture to temperatures well past 450°F (230°C), and because of its high affinity for moisture, molecular sieve is able to bring the relative humidity in packages down as low as 10% RH.

Applications:

  1. Dehydration of many kinds of liquids (say Ethanol).
  2. Dehydration of air.
  3. Dehydration of Refrigerant.
  4. Dehydration of natural gas or methane.
  5. Dehydration of cracked gas, ethylene, ethyne, propylene or butadiene

Molecular Sieve 13X

REQUEST CALLBACK

Molecular Sieve 13X
Approx. Rs 180 / Kilogram
Get Best Quote

Molecular sieves are crystalline metal aluminosilicates having a three dimensional interconnecting network of silica and alumina tetrahedra. Natural water of hydration is removed from this network by heating to produce uniform cavities which selectively adsorb molecules of a specific size.

A 4 to 8-mesh sieve is normally used in gasphase applications, while the 8 to 12-mesh type is common in liquidphase applications. The powder forms of the 3A, 4A, 5A and 13X sieves are suitable for specialized applications.

Long known for their drying capacity (even to 90°C), molecular sieves have recently demonstrated utility in synthetic organic procedures, frequently allowing isolation of desired products from condensation reactions that are governed by generally unfavorable equilibria. These synthetic zeolites have been shown to remove water, alcohols (including methanol and ethanol), and HCl from such systems as ketimine and enamine syntheses, ester condensations, and the conversion of unsaturated aldehydes to polyenals.

DescriptionThe sodium form represents the basicstructure of the type X family like ACUROSORB 13X, with an effective pore opening in the 910¼ range. Will not adsorb(C4F9)3N, for example.
Major ApplicationsCommercial gas drying, air plantfeed purification (simultaneous H2O and CO2 removal) and liquid hydrocarbon/natural gas sweetening (H2S and mercaptan removal).

 

Yes! I am interested

Zeolite Molecular Sieves 4A

REQUEST CALLBACK

Zeolite Molecular Sieves 4A
Approx. Rs 180 / Kilogram
Get Best Quote

Molecular sieves are crystalline metal aluminosilicates having a threedimensional interconnecting network of silica and alumina tetrahedra. Natural water of hydration is removed from this network by heating to produce uniform cavities which selectively adsorb molecules of a specific size.

A 4 to 8-mesh sieve is normally used in gasphase applications, while the 8 to 12-mesh type is common in liquidphase applications. The powder forms of the 3A, 4A, 5A and 13X sieves are suitable for specialized applications.

Long known for their drying capacity (even to 90°C), molecular sieves have recently demonstrated utility in synthetic organic procedures, frequently allowing isolation of desired products from condensation reactions that are governed by generally unfavorable equilibria. These synthetic zeolites have been shown to remove water, alcohols (including methanol and ethanol), and HCl from such systems as ketimine and enamine syntheses, ester condensations, and the conversion of unsaturated aldehydes to polyenals.

DescriptionIn ACUROSORB 4A sodium form represents the type A family of molecular sieves. Effective pore opening is 4Å, thus excluding molecules of effective diameter >4Å, e.g., propane.
Major ApplicationsPreferred for static dehydration in closed liquid or gas systems, e.g., in packaging of drugs, electric components and perishable chemicals; water scavenging in printing and plastics systems and drying saturated hydrocarbon streams.Adsorbed species include SO2, CO2, H2S, C2H4, C2H6, and C3H6. Generally considered a universal drying agent in polar and nonpolar media.
Yes! I am interested

Carbon Molecular Sieves - CMS 200

REQUEST CALLBACK

Carbon Molecular Sieves - CMS 200
Approx. Rs 540 / Kilogram
Get Best Quote

ACUROSORB CMS 200 carbon molecular sieve is a new kind of adsorbent developing from 1970,and is excellent non-pole carbon material. ACUROSORB CMS 200 can be used as separate the nitrogen from the oxygen under normal temperature and pressure. TO compare with tradition, PSA has some advantages: the investment is lower, start-up time is short: the cost for Nitrogen is lower. It has been widely applied in petroleum chemical industry, metal heat treatment, electron production and keep-fresh of foodstuff.

Carbon molecular sieve technical index:
-Diameter:1.6¬2.2mm
-Absorption period:2×60 second
-Bulk density:630-660 g/l
-Crushing strength:≥100N/p Min

modelAdsorption pressure(MPa)Nitrogen purity(%)Output rate of nitrogen(L/h.Kg)

Nitrogen reclaim rate

(%)(N2/Air)

CMS-2000.699.9960≥21
99.9115≥31
99.5165≥40
99.0250≥45
98.0265≥46
97.0325≥48
0.899.9972≥21
99.9140≥31
99.5200≥40
99.0275≥45
98.0325≥46
97.0365≥48
Yes! I am interested

Carbon Molecular Sieve - CMS220

REQUEST CALLBACK

Carbon Molecular Sieve - CMS220
Approx. Rs 540 / Kilogram
Get Best Quote

ACUROSORB CMS220 carbon molecular sieve is a new kind of adsorbent developing from 1970,and is excellent non-pole carbon material. It can be used as separate the nitrogen from the oxygen under normal temperature and pressure. TO compare with tradition, PSA has some advantages: the investment is lower, start-up time is short: the cost for Nitrogen is lower. It has been widely applied in petroleum chemical industry, metal heat treatment, electron production and keep-fresh of foodstuff.
ACUROSORB CMS 220 Carbon molecular sieve technical index:
-Diameter:1.6¬2.2mm
-Absorption period:2×60 second
-Bulk density:630-660 g/l
-Crushing strength:≥100N/p Min
MODELAdsorption pressure(MPa)Nitrogen purity(%)Output rate of nitrogen(L/h.Kg)Nitrogen reclaim rate(%)(N2/Air)
CMS-2200.699.9965≥21
99.9120≥31
99.5175≥40
99.0260≥45
98.0278≥46
97.0335≥48
0.899.9985≥21
99.9165≥31
99.5220≥40
99.0280≥45
98.0335≥46
97.0375≥48
Yes! I am interested

Carbon Molecular Sieve - CMS 240

REQUEST CALLBACK

Carbon Molecular Sieve - CMS 240
Approx. Rs 540 / Kilogram
Get Best Quote

ACUROSORB CMS 240 carbon molecular sieve is a new kind of adsorbent developing from 1970,and is excellent non-pole carbon material. ACUROSORB CMS 240 can be used as separate the nitrogen from the oxygen under normal temperature and pressure. TO compare with tradition, PSA has some advantages: the investment is lower, start-up time is short: the cost for Nitrogen is lower. It has been widely applied in petroleum chemical industry, metal heat treatment, electron production and keep-fresh of foodstuff.

Carbon molecular sieve technical index:
-Diameter:1.6¬2.2mm
-Absorption period:2×60 second
-Bulk density:630-660 g/l
-Crushingstrength :≥100N/p Min

modelAdsorption pressure(MPa)Nitrogen purity(%)Output rate of nitrogen(L/h.Kg)Nitrogen reclaim rate(%)(N2/Air)
CMS-2400.699.9970≥21
99.9130≥31
99.5190≥40
99.0285≥45
98.0305≥46
97.0370≥48
0.899.9992≥21
99.9180≥31
99.5240≥40
99.0305≥45
98.0365≥46
97.0410≥48
Yes! I am interested

Zeolite Molecular Sieve 5A

REQUEST CALLBACK

Zeolite Molecular Sieve 5A
Approx. Rs 180 / Kilogram
Get Best Quote

Molecular sieves are crystalline metal aluminosilicates having a threedimensional interconnecting network of silica and alumina tetrahedra. Natural water of hydration is removed from this network by heating to produce uniform cavities which selectively adsorb molecules of a specific size.

A 4 to 8-mesh sieve is normally used in gasphase applications, while the 8 to 12-mesh type is common in liquidphase applications. The powder forms of the 3A, 4A, 5A and 13X sieves are suitable for specialized applications.

Long known for their drying capacity (even to 90°C), molecular sieves have recently demonstrated utility in synthetic organic procedures, frequently allowing isolation of desired products from condensation reactions that are governed by generally unfavorable equilibria. These synthetic zeolites have been shown to remove water, alcohols (including methanol and ethanol), and HCl from such systems as ketimine and enamine syntheses, ester condensations, and the conversion of unsaturated aldehydes to polyenals.

DescriptionDivalent calcium ions in place of sodium cations give apertures of ACUROSORB 5A which exclude molecules of effective diameter >5Å, e.g., all 4-carbon rings, and iso-compounds.
Major ApplicationsSeparation of normal paraffins frombranched-chain and cyclic hydrocarbons; removal of H2S, CO2 and mercaptans from natural gas. Molecules adsorbed include nC4H10, nC4H9OH, C3H8 to C22H46, and dichlorodifluoro-methane

 

Yes! I am interested

Molecular Sieve 13x

REQUEST CALLBACK

Molecular Sieve 13x
Approx. Rs 245 / Kilogram
Get Best Quote

Molecular Sieve 13x.

Specifications:

  1. Type: Adsorbent
  2. Color: White
  3. Size: 3-5 mm
  4. Usage: Petroleum Additives 


Additional Information:

  • Minimum Order Quantity: 25 Kilogram
Yes! I am interested

Molecular Sieve 3A

Molecular Sieve 3A
Approx. Rs 180 / Kilogram
Yes! I am interested



Molecular Sieve Desiccant

Molecular Sieve Desiccant
Yes! I am interested



 
X


Call Us:  +91-8079450362
Acuro Organics Limited, New Delhi
Rohit Karnani (Director)
No.27, Ashoka Chambers, 5-B, Rajendra Park Pusa Road,
New Delhi - 110060, Delhi, India
Contact via E-mail
Contact via SMS



Home  |   Profile   |  Our Product Range  |  Site Map  |   Contact Us   |   Mobile Site

© Acuro Organics Limited, New Delhi. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Acuro Organics Limited, New Delhi